Model : HT7S
Model : MC-1
Model : MUSB485
Model HT7S Loop powered transmitter series are designed for highly
accurate humidity and temperature measurement for a wide range of
industrial, pharmaceutical and building automation applications
There are three variants in HT7S series: Humidity transmitter, Humidity
transmitter with RTD Pt 100 Passive output and Humidity cum
HT7S series transmitter is available in Wall mount and Duct mount options. Transmitter provides linear output signals directly proportional to relative humidity and temperature.
HT7S series transmitter is available in Weather proof or Ex-proof enclosure options suitable for harsh environment.
HT7S Model provides better than 2% RH accuracy and Class A RTD with excellent long term stability. All these devices provide high performance in a compact design. Loop powered 4-20 mA DC output signals can be fed as input to remote display, recorder, controller or PLC/DCS, over a long distance.
Two-wire connections allow easy installation directly into air ducts or within a controlled area. Most importantly, the right choice of the filter cap enables usage in harsh environmental conditions.
Masibus MC-1-U GPS Master Clock has been developed for the power and process industry time synchronization requirements. It is the most featured and cost-effective GPS time synchronization solution available in 1U compact size. MC-1-U is Reliable and provides time accuracy of 150nsec at basic level. MC-1-U generates wide range of time code and pulse signals via different output ports like RS232 serial, PPS, IRIG-B, Ethernet and PFC relay. These outputs have ample drive capability to drive multiple loads in parallel and its parameters are fully configurable. The GPS receiver has built-in RTC backed up with on board battery to maintain time during power loss and instant recovery on power resumption. MC-1-U has a front panel display and keypad for configuration and viewing of time parameters and output ports, discrete LEDs provide at-aglance status and health information. MC-1-U is also programmable via hyper terminal on the serial port, Ethernet parameters like IP gateway and subnet mask are programmable via the Ethernet port using Telnet, for more than one Ethernet port each port is individually programmable for IP and subnet.
The mUSB232 & mUSB485 is a family of communication devices. The
models provide a simple method of adapting Industrial and commercial serial devices with RS232/485 interface to modern USB ports. Each media converter contains a small electronic circuit board mounted inside a rugged plastic enclosure capable of withstanding industrial temperature ranges. The integrated electronics also include
RS232/RS485 level shifters and Tx/Rx LEDs to provide a visual
indication of data traffic through the media converter.
The Cable incorporates a standard USB-A device connector for connection to an upstream host or hub port. RS232-level signals, including modem handshake signals, are available on an industry standard DE-9P connector cable. The RS232-level data rate range is 300 baud to 1 M baud.
Model : UT94
Model : AI/RTD/AO
Model : DDU
Masibus Model UT-94 is a 4 wire versatile universal transmitter that
isolates & converts wide range of conventional / unconventional process inputs into standard process signals acceptable to commercially off the shelf (COTS) automation products. Signal inverting option is also available. The input circuit can accommodate a variety of input signal levels including bi-directional, reverse, true and live-zero.
A built in 4 digit display facilitates the user to monitor process value and helps in fast configuration and calibration. Model UT-94 enables analog signals to transmit without galvanic connections between the fields to the receiving instrument. This in turn allows ground or reference levels to float up to thousands of volts at its input terminals, and prevents circulating current between differing ground potentials that can contaminate input signal.
Masibus Linearized RTD / TC Field Interface Board have 8 nos of independent Thermocouple or Pt-100 RTD (3W) input channels. All 8 channels have factory set either Current or Voltage Output signal. Optionally offered Windows based User friendly mTRAN configuration software allows user to configure each channel for different type of TC/RTD input. Field interface Board has channel wise open sensor indication that allows user to identify channel wise faults. Linearized RTD / TC Field Interface Board have The interface boards are built using the latest Technology to deliver high performance in Accuracy, Resolution, Stability and Isolation. Zero/Span adjustments, sensor break detection/protection, Reverse output and Reverse Polarity protection features.
Masibus Digital Display Unit DDU-XX is a versatile, multi-featured code
driven Digital Display. It displays parameters like Time, Date, Day,
Calendar and Frequency. The Time, Date and Day display decodes and
displays all Time protocols like IRIG-B modulated/ TTL, NTP (Ethernet)
and Serial (NGTS, NMEA and T-Formats). Frequency Display decodes
frequency from raw input signal or from Ethernet input. IRIG-B decoding
supports the 1 KHz modulated format (B12x) and the TTL format (B00x).
The DDU has built-in Battery backed RTC which maintains time in case of loss of power and communication break. Redundant Input option is available for critical installations.