Model : AXF/AXW
Model : DY
YOKOGAWA's magnetic flowmeter is supported by a long history of more than half a century. They added innovative specifications in each era, and have always lead the industry. The consistent policy of YOKOGAWA's magnetic flowmeter is to have high performance and high quality.The world's first dual frequency excitation method adopted in the ADMAG AM series announced in 1988 pushed the stability measurement of the magnetic flowmeter to a higher standard. Capacitance type magnetic flowmeter ADMAG CA series has made it possible to measure low conductivity fluid and insulating adhesive fluid. ADMAG AXR series realized overwhelming high performance with limited power supply voltage of two-wires.
Working principle: When a shedder bar is placed in a flow, Karman vortices are generated on the downstream side of the bar. The Karman vortices are detected by two piezoelectric elements installed in the upper part of the shedder bar. The vortex frequency is proportional to the flow velocity in a specific range of Reynolds numbers. Therefore, flow velocity or flow rate can be determined by measuring vortex frequency The digital YEWFLO vortex flow meter combines the field proven sensor and body assembly with a unique and powerful combination of digital technology that includes spectral signal processing (SSP), a Yokogawa innovation. The digitalYEWFLO vortex flow meter is accurate and stable, even in harsh process conditions, and has a highly reliable and robust design that delivers improvements in plant efficiency and reduced operating costs.
In the last decade, the use of Coriolis flow meters has been changing from general purpose to supporting your needs in specific applications. While the technological complexity increased, the demand for simple operation and handling is also a rising requirement. Yokogawa answers these needs by offering six dedicated product lines with two specialized transmitters allowing the highest flexibility - the ROTAMASS Total Insight.
The ROTAMASS philosophy gives Total Insight throughout the whole lifecycle. To facilitate optimal processes and increase the efficiency of personnel, Yokogawa has placed a strong focus on simplifying fundamental operating concepts with Total Insight. The Total Insight concept is built in to the latest generation of Rotamass transmitters and provide enhanced settings for customized setups, pre-defined trend views, or multiple configuration sets for fast changeover in batch production are supported.
Model : FS-600
Model : RFA
Strengthened its focus on flowmeters through cooperation with and the eventual acquisition of the German flowmeter manufacturer ROTA. In so doing Yokogawa gained access to 100 years of flowmeter expertise and completed its flowmeter portfolio by adding the Rota-meter (variable area). At first glance the instrument looks impressive with its all stainless steel design. A closer look reveals a unique patented "float blockage" detection system. Operational safety is of the utmost importance in any flowmeter, and the RAMC is no exception – wetted parts are available in a variety of materials, and intrinsically safe Outputs are available as an option. If you value flexibility in a flowmeter – from the measurement of air to highly aggressive liquids – in situ replacement of the indicator without loss of performance and the interchangeability of floats – then the RAMC is the right choice for you. The RAMC combines all the advantages of the variable area principle with robust design, reliable measurement, with or without power, HART® or Profibus PA, culminating in a truly universal flowmeter for gases, liquids and steam applications.
The FS-600 series uses proven thermal dispersion technology to provide a robust no moving part flow switch even without filtration. The solid state sensor is compatible with both conductive and non-conductive fluids. Suitable for fluids with particulates or slurries, and is immune to changes in media viscosity. The straight through switch is designed for a long life and can be mounted in any orientation and can handle a wide range of flow rates. No moving parts means years of reliable service.
The operating principle of the FS-600 flow switch is based on the calorimetric principle. The FS-600 uses the cooling effect of a flowing fluid to monitor the flow rate. The amount of thermal energy that is removed from the tip determines the local flow rate. This temperature-based operating principle can reliably sense the flow of virtually any liquid.
GEMS Sensors popularized the RotorFlow’s paddlewheel design by combining high visibility rotors with solid-state electronics that are packaged into compact, panel mounting housings. They provide accurate flow rate output with integral visual confirmation...all with an unprecedented price/performance ratio. RFA Types feature a 0 to 10 VDC analog output which is proportional to flow rate.
Model : FT110
Model : 1006H
Model : 1008S
Gems Hall Effect turbine flow rate sensor is ideal for OEM applications involving low flow liquid monitoring. The low cost coupled with 1/2% repeatability makes it an ideal candidate for replacing dispensing timer systems. Unlike existing timing systems, turbine technology is not influenced by changes in system pressure caused by aging filters. The sensor’s standard power and output specifications make it easy to retrofit to existing controllers.
Masibus' Model 1006H is compact panels mount Flow Rate Totalizer having 6-digit single display group for flow rate and batch total. Measured parameters are displayed with high accuracy and floating decimal point position. If auxiliary power fail, the displayed Batch Total, Integrated total and all programming parameters are stored in non-volatile memory, and are automatically recovered when auxiliary power is restored. Model-1006H has optional two relays to configure simple batching operations with High/Low, Pre warn or End of process set points. Alarm/relay and data communication status are indicated on separate LEDs. Model 1006H FIT is equipped with additional features like transmitter power supply to excite field transmitter, Isolated retransmission output for recorder and It has optional serial communication on RS485 over MODBUS RTU protocol for interfacing with SCADA/PLC, PC based data acquisition and reporting system.The programming, calibration and operation of the instrument are done by four simple keys. The instrument is provided with five-point calibration.The unit can be calibrated in installed condition itself by front panel keys at predefined points.
Masibus' Model 1008S has features and performance you will find only in high end flow computers, like high accuracy, high resolution,PT compensation and fast sampling to measure and totalize with precision even fast changing flow rates. The unit has a 5-digit flow rate display and an 8-digit batch total/ integrated total display with rollover counts. All Totalized data and configured parameters are stored in non-volatile memory and retained during power off and power disruptions. Model-1008S has optional four relays, 2 for flow rate and 2 for batch total, the flow rate relays can be setup for Hi/Lo Alarm and the batch total relays for Pre and Final batch total. 1008S also has optional four digital inputs to operate the Totalizing function remotely. RS485 and Flow rate Re-transmission option allows easy interface with PLC/DCS/SCADA systems. A selectable square root extractor function enables compatibility with DP transmitters without built-in square root extractor